|
TEC
Award
"The
best part
|
|
||||||||||||||||||||
|
SPL
Surround Monitor Controller One-point stereo and 5.1 volume control, source and speaker management Review in RESOLUTION 9/2003 SPL 2380 If you're serious about multichannel then you have to be serious about getting a surround monitor controller. However, most are pricey. ROB JAMES reports on a capable box with a truly affordable price tag. SURROUND CAPABLE DIGITAL consoles are now commonplace and most of the current DAWs also offer surround modes. Despite this, the amount of surround material generated in smaller studios has so far been less than expected. A number of factors are to blame for this: unsuitable rooms; the cost and bulk of the extra speakers; fear of the unknown; and the lack of affordable surround monitor controllers. Current digital consoles mostly have at least some surround monitor control functions but the legions of people working without a hardware console have faced a dilemma. It is perfectly possible to configure DAW software to provide monitor control. However, the lack of a quick and convenient hardware level control and muting is undesirable since even the most well-behaved DAW will output full-scale digital noise once in a while with highly undesirable consequences for hearing, hardware and good relations with the neighbours. The alternatives have been to use a domestic AV amplifier or receiver as a monitor controller or to spend upwards of UK£1600 for a dedicated controller. A domestic AV amplifier can be a reasonable compromise but, unless it is one of the more exotic and expensive designs, it will degrade the signal in a number of possible ways. VCAs or DACs are often employed to control level and many designs convert all incoming signals to digital then back to analogue. Against this
background, SPL has introduced the Model 2380 Surround Monitor Controller
at the hitherto unprecedented price point of UK£599. There are no
bass management functions, encoder/decoder inserts, or dedicated metering
take-off points. 5.1 and stereo are the only formats catered for. However,
there are two 5.1 inputs and two stereo inputs. So, just
how has SPL achieved this price point? Many years ago we had a name for
devices like this, usually known by the acronym PIB for Pot-In-a-Box.
In essence, this is precisely what the SPL 2580 is. A discrete, six-level
potentiometer is used to provide the attenuation and all switching is
handled by precision latching switches. The only active circuitry involved
is SPL's long established and well thought of electronic balancing. Ideally suited
to simple configurations from straightforward control of a single 5.1
and stereo source through to workstations with multitrack and stereo master
recorders, the 2380 offers a purist approach to the problem with tantalising
claimed performance figures. The catch? Well, beauty is commonly supposed to lie in the eye of the beholder so I suppose there are people who will find it attractive... The French have an expression that sums up its appearance, 'joli-laide' (literally translated as 'pretty/ugly'). A triumph of function over form, then! In action the switches need a firm press, reflecting their mechanical nature and the pot is smooth but fairly stiff a good thing since it is less likely to be knocked out of position. For those of us now more familiar with feather touch digital switches this lends a vintage air to the unit. With the Model 2380, SPL has spotted a real gap in the market and filled it. Anyone seriously contemplating working in surround with a workstation-based rig should be looking at this box. There is enough flexibility in the inputs and outputs to cover a wide range of uses. It is built like a tank and is suitable for monitoring surround mixes in 5.1 formats all the way up to DVD-A and SACD mastering. The ins
and outs
The rear panel demonstrates an unusual level of understanding of the way many people have to work. All the legends are printed the 'normal' way up and upside down so they can be read when peering myopically over the top of the unit. Balanced
inputs A and C are on a single 25-pin Sub-D female with the usual Tascam
pin-outs. Similarly the slave output is balanced and also uses a 25-pin
female Sub-D. Inputs B and D are unbalanced phonos. All the speaker outputs
are 74-inch jacks. Powering is built-in and there is a mains switch with
a well subdued switch-on thump unlike many of the more expensive
units. PROS:
Price; simplicity; sound. CONS: All in one unit may be too bulky for some imstallations; a tad chunky in appearance; SPL calibration is down to the user
|
|
||||||||||||||||||||
|
|
|||||||||||||||||||||
|
| |||||||||||||||||||||